Network issues

If you have issues with the network on your please check the following:

  1. Make sure the jumper switched to a boot mode
  2. Try to install Hypriot OS if you are using another OS
  3. Check the ethernet switch and network chips for extra solder paste. If you see some tiny silver balls around the chip, just scrape them away with a needle or any other tool.

Extra solder material left on a network chip LAN9514

LAN9514 network chips locations on the board

Network switch chip location on the board


Was this article helpful?

0 out of 0 found this helpful
Have more questions? Submit a request

Comments (0 comments)

Article is closed for comments.